Aruba AP 315 Wireless Access Point

AP-315 (controller-managed) and IAP-315 (Instant): - 802.11ac – 5 GHz 4x4 MIMO (1,733 Mbps max rate) and 2.4 GHz 2x2 MIMO (400 Mbps max rate) radios, with a total of four integrated omni-directional downtilt dual-band antennas

WI-FI RADIO SPECIFICATIONS

• AP type: Indoor, dual radio, 5 GHz 802.11ac 4x4 MIMO and 2.4 GHz 802.11n 2x2 MIMO

• Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)

• 5 GHz: Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4x4 VHT80 or 2x2 VHT160 client devices

• 2.4 GHz: Two spatial stream Single User (SU) MIMO for up to 400 Mbps wireless data rate to individual 2x2 VHT40 client devices (300 Mbps for HT40 802.11n client devices)

• 5 GHz: Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously

• Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio

• Supported frequency bands (country-specific restrictions apply): - 2.400 to 2.4835 GHz - 5.150 to 5.250 GHz - 5.250 to 5.350 GHz - 5.470 to 5.725 GHz - 5.725 to 5.850 GHz

• Available channels: Dependent on configured regulatory domain

• Dynamic frequency selection (DFS) optimizes the use of available RF spectrum.

• Supported radio technologies: - 802.11b: Direct-sequence spread-spectrum (DSSS) - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

• Supported modulation types: - 802.11b: BPSK, QPSK, CCK - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

• Transmit power: Configurable in increments of 0.5 dBm

• Maximum (conducted) transmit power (limited by local regulatory requirements): - 2.4 GHz band: +18 dBm per chain - 5 GHz band: +18 dBm per chain - Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain

• Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks.