Aruba AP 305 Wireless Access Point

AP-305 (controller-managed) and IAP-305 (Instant): - 802.11ac – 5GHz 3x3 MIMO (1,300 Mbps max rate) and 2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with a total of three integrated omni-directional downtilt dual- band antennas.

WI-FI RADIO SPECIFICATIONS

• AP type: Indoor, dual radio, 5GHz 802.11ac 3x3 MIMO and 2.4GHz 802.11n 2x2 MIMO

• Software-configurable dual radio supports 5GHz (Radio 0) and 2.4GHz (Radio 1)

• 5GHz: Three spatial stream Single User (SU) MIMO for up to 1,300 Mbps wireless data rate to individual 3x3 VHT80 client devices

• 5GHz: Two spatial stream Multi User (MU) MIMO for up to 867 Mbps wireless data rate to up to two (1x1 VHT80) MU-MIMO capable client devices simultaneously

• 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 400 Mbps wireless data rate to individual 2x2 VHT40 client devices (300 Mbps for HT40 802.11n client devices)

• Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio

• Supported frequency bands (country-specific restrictions apply): - 2.400 to 2.4835GHz - 5.150 to 5.250GHz - 5.250 to 5.350GHz - 5.470 to 5.725GHz - 5.725 to 5.850GHz

• Available channels: Dependent on configured regulatory domain

• Dynamic frequency selection (DFS) optimizes the use of available RF spectrum

• Supported radio technologies: - 802.11b: Direct-sequence spread-spectrum (DSSS) - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

• Supported modulation types: - 802.11b: BPSK, QPSK, CCK - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

• Transmit power: Configurable in increments of 0.5 dBm

• Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): - 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2) - 5GHz band: +18 dBm per chain, +23 dBm aggregate (3x3) - Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain

• Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks

• Maximum ratio combining (MRC) for improved receiver performance

• Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance

• Short guard interval for 20MHz, 40MHz and 80MHz channels

• Space-time block coding (STBC) for increased range and improved reception

• Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

• Transmit beam-forming (TxBF) for increased signal reliability and range